Showing posts with label Quilt Blocks. Show all posts
Showing posts with label Quilt Blocks. Show all posts

Log Cabin




A: Dark, cut 1 ¾” x WOF = 2
From scraps of Dark Fabric, cut 2 ¼” x 2 ¼” = 3
B: Medium, cut 1 ¾” x WOF = 2
C: Light, cut 1 ¾” x WOF = 2

Use ¼” seam allowance always!
The Log Cabin block is great for a new quilter because it is easy to piece. There can be many different variations of the block just by switching fabrics around and playing with darks and lights. It is a great way to make a masterpiece out of your scraps too!
1. Start your center with your 2 ¼” x 2 ¼” cut square. Traditionally a red fabric was used representing the fireplace/hearth of the home.
2. Stitch the pieces together in order and iron seams out as you go (toward the piece you just sewed on). Note when to change fabric strips.
3. You can precut each “Log” to the right length, or you can take each strip and sew it to the block and trim the excess off with your rotary cutter.
4. Each log added to the center overlaps creating a design as you go.
5. Square up you finished block to about 9 ½” x 9 ½”

I found instructions online (yarnslave.com). They are WAY more specific! The measurements are for a larger block, so don’t mind those. Just follow the diagrams mainly.

Flying Geese – Cypress Block


A: Dark, cut 5¾” x 5¾” = 2 (Goose Body)
B: Medium, cut 3¼”x 3¼” = 4 (Corner Half Square Triangles)
C: Light, cut 5” x 5” = 2 (Middle Square)
D: Light, cut 3¼”x 3¼” = 12 (Flying Geese Corners and HST Corners)

Use ¼” seam allowance always!
1. On the back of all the D squares, mark a diagonal line.
2. Match 4 of the marked D squares with the 4 B squares, right sides together.
3. Stitch 1/4" on one side of the diagonal mark...turn square and stitch 1/4" on the other side of the diagonal mark. (See June’s instructions on HSTs)
4. Cut apart on diagonal marked line.
5. Press seams toward darker fabric.
6. Trim off the little tails with scissors. Makes four identical HSTs.
7. Follow Instructions on making Flying Geese Included. (You already have your squares cut to the right size—no need to do the math again! Use Fabric A for A in the instructions and Fabric D for B, and your Diagonal lines are already drawn).
8. Lay out block on table (See Diagram 1). Note what direction the corner HSTs need to be.
Diagram 1
9. Sew each row together and press seams in the direction of the arrows (See Diagram 2). Note rows 1 and 3 the seams are pressed out, and row 2 the seams are pressed in.
Diagram 2
10. Sew rows together by matching seams, right sides facing. Make sure the two seams but up next to each other in each row. Press seams to one side.
11. Square up block to about 9 ½” x 9 ½”

Pinwheels






A: Dark, cut 6” x 6” = 2
B: Light, cut 6 x 6 = 2

Use ¼” seam allowance always!
1. On the back of the lightest fabric, mark a diagonal line.
2. Match the opposite color with the marked square, right sides together.
3. Stitch 1/4" on one side of the diagonal mark...turn square and stitch 1/4" on the other side of the diagonal mark.
4. Cut apart on diagonal marked line.
5. Press seams toward darker fabric.
6. Trim off the little tails with scissors.
7. Square up completed unit to 5” x 5” Makes four identical HSTs.
8. Lay out block on table. Note where your darks and lights need to be. 9. With right sides together, sew top two HSTs together, then the bottom two.
10. Press seams on each to opposite sides.
11. Match center seams, right sides facing. Make sure they but up next to each other. Sew top set to bottom set. Press Seam to one side.
12. Square up block to about 9 ½” x 9 ½”






Half-Square Triangles



There are many, many ways to create Half-Square Triangles (HSTs): the grid method, Triangles on a Roll®, Thangles®, a number of rulers, templates and many more.
To calculate the cutting size of the initial square, add an additional 1" to your cutting size for a square unit. Once you have cut all your squares:
1. On the back of the lightest fabric, mark a diagonal line.
2. Match the opposite color with the marked square, right sides together.
3. Stitch 1/4" on one side of the diagonal mark...turn square and stitch 1/4" on the other side of the diagonal mark.
4. Cut apart on diagonal mark.
5. Press seams toward darker fabric.
6. Trim off the little tails with scissors.
7. Square up completed unit to size needed.
8. Makes two identical HSTs.



The quilting books say that you only need to add 7/8", not 1", to the measurements, but I find that stitching and pressing fabric on the diagonal is not always an exact science. This way will use just a little more fabric, but will allow you to control the final measurement of the unit.



Once you know how to make them, the flood doors open with what you can create! Play around with light and dark fabrics create something fun!


Nine Patch





Three Different Fabrics

A: Dark, cut 3 ½” x 14 ¼” = 3
B: Medium, cut 3 ½” x 14 ¼” = 3
C: Light, cut 3 ½” x 14 ¼” = 3

Use ¼” seam allowance always!

1. Sew the three sets of three strips together (ABC, CAB, BCA).
2. Press towards the darker color.
3. Square up one end of each strip set using seam lines as straight edge. Cross cut 3 ½” you should get 4 rows out of each set.
4. Layout blocks on the table like diagram above, and sew the top two rows together right sides facing butting up the seams so they line up correctly. Press to one side
5. Sew bottom row to top section--right sides facing butting up the seams so they line up correctly. Press to one side.
6. Square up your blocks to about 9 ½” x 9 ½”
7. Makes 4 Blocks

Rail Fence


A: Dark, cut 2” x WOF (Width of Fabric) = 1
B: Medium, cut 2” x WOF = 1
C: Light, cut 2” x WOF = 1

1. Sew the three strips together (A to C, B to AC). You can switch the darks, mediums and lights around and get a different look. Experiment and find out what you like best. Press seams to one side.
2. Cross cut 4 sets at 5”
3. Layout blocks on the table, and sew the top two blocks together right sides facing. Press towards the right (vertical) B.
4. Sew bottom two blocks together right sides facing. Press towards the left (vertical) B.
5. Sew top blocks to bottom blocks making sure the center seams but up next to each other. Press seam to one side.
6. Square up your block to about 9 ½” x 9 ½”